FREE · PRIVATE · INSTANT

Ready Mix Concrete Calculator

Ready Mix Concrete Calculator estimates ready-mix cubic yards and truck loads for supplier orders and batch-plant calls. Enter job dimensions in U.S. customary units, adjust supplier assumptions, and get purchase-ready quantities instantly.

Loading calculator…

HOW IT WORKS

Formula and assumptions

Convert every dimension to feet, multiply length × width × depth × quantity, apply a separate compaction allowance where shown, divide by 27, then apply waste.

Dimensions describe finished material volume.
Bulk density, bag yield, and supplier pricing remain editable.

FIELD CHECK

Before you order

Confirm supplier minimums, short-load fees, truck capacity, placement sequence, and whether the quoted volume includes your waste factor.

Worked example

Example: with length 30 ft, width 20 ft, depth / thickness 5 in, matching sections 1, the ready mix concrete calculator returns 10.19 cu yd for material to order. The supporting check is truck loads: 2 loads. Replace the prefilled measurements and supplier assumptions with the project values before ordering.

PROJECT GUIDE

Using this calculator well

WHEN TO USE IT

Best use of this calculator

Use the result as a planning estimate, then verify field measurements and product-specific data before ordering or building.

INPUTS EXPLAINED

What each input means

Length: Enter the measured value and choose the matching unit (ft, in, yd, m, cm).
Width: Enter the measured value and choose the matching unit (ft, in, yd, m, cm).
Depth / thickness: Enter the measured value and choose the matching unit (in, ft, cm, mm).
Matching sections: Enter the project value used by the calculation.
Waste allowance: Enter the project value in %.
Bulk density: Enter the project value in lb/cu ft.
Truck capacity: Enter the project value in cu yd.
Price per cubic yard: Enter the project value in $.

COMMON MISTAKES

Checks that prevent bad estimates

Mixing units or entering a measurement in a different unit than the selected field unit.
Using a planning default when the exact manufacturer or supplier specification is available.
Rounding intermediate measurements too early instead of rounding the final purchase quantity.
Ignoring waste, compaction, cuts, laps, settlement, or full-package rounding where the project requires them.

SOURCES & REVIEW

How this estimate is supported

The implemented formula, assumptions, and worked example on this page are the calculator-specific reference. BuildYard's broader rules are documented in the Calculation Methodology and Sources & References.

For material density, coverage, yield, dimensions, package quantity, price, and other product-specific values, the current manufacturer or supplier specification should override a planning default.

Last reviewed: September 15, 2026, as part of the site-wide calculator workflow validation pass. See the BuildYard Changelog.

LEARN THE METHOD

Guides related to this calculator

All guides

Concrete

How to Estimate Concrete Volume, Bags, and Ready-Mix

Learn how concrete volume, cubic yards, bag yield, waste, and ready-mix orders fit together so you can build a practical material estimate.

Read guide →Estimating basics

How to Use Construction Calculators for Material Estimates

Learn how to use construction calculators, choose project inputs, verify supplier data, handle waste and rounding, and check estimates before ordering.

Read guide →

COMMON QUESTIONS

Ready Mix Concrete Calculator FAQ

What does the Ready Mix Concrete Calculator calculate?

It converts the measurements for supplier orders and batch-plant calls into the buying units normally used for ready-mix cubic yards and truck loads, with the relevant waste, package, weight, or cost outputs shown on the result card.

How accurate is this ready mix concrete calculator?

The geometry is calculated from the values you enter. Final ordering accuracy still depends on field measurements, supplier density or coverage, product dimensions, compaction, cuts, and the selected allowance.

What should I verify for supplier orders and batch-plant calls?

Confirm supplier minimums, short-load fees, truck capacity, placement sequence, and whether the quoted volume includes your waste factor. Confirm the selected product, field conditions, and purchasing increments before placing the order.

Should I round the result up?

Yes for indivisible buying units such as bags, sheets, bundles, pallets, boxes, bars, and truck loads. The calculator rounds those purchase quantities up automatically.

KEEP ESTIMATING

Related concrete calculators

All Concrete tools