FREE · PRIVATE · INSTANT

Cut and Fill Calculator

Cut and Fill Calculator estimates normalized bank cut, compacted fill, and loose soil movement for balancing a rectangular grading zone. Enter job dimensions in U.S. customary units, adjust supplier assumptions, and get purchase-ready quantities instantly.

Loading calculator…

HOW IT WORKS

Formula and assumptions

Calculate bank cut and loose haul volume; cut-and-fill mode first normalizes reusable cut to compacted fill using shrink before balancing.

Average dimensions approximate the excavation as a rectangular prism.
Swell and density are editable estimates.

FIELD CHECK

Before you order

Use separate average cut and fill depths plus project-specific reuse, bank-to-compacted shrink, and swell; detailed balance still requires survey surfaces and material classification.

Worked example

Example: with excavation length 100 ft, excavation width 50 ft, average cut depth 1.5 ft, average fill depth 1 ft, the cut and fill calculator returns 86.42 cu yd for estimated loose export. The supporting check is bank cut: 277.78 cu yd. Replace the prefilled measurements and supplier assumptions with the project values before ordering.

PROJECT GUIDE

Using this calculator well

WHEN TO USE IT

Best use of this calculator

Use the result as a planning estimate, then verify field measurements and product-specific data before ordering or building.

INPUTS EXPLAINED

What each input means

Excavation length: Enter the measured value and choose the matching unit (ft, in, yd, m, cm).
Excavation width: Enter the measured value and choose the matching unit (ft, in, yd, m, cm).
Average cut depth: Enter the measured value and choose the matching unit (ft, in, yd, m, cm).
Average fill depth: Enter the measured value and choose the matching unit (ft, in, yd, m, cm).
Matching sections: Enter the project value used by the calculation.
Reusable cut material: Enter the project value in %.
Bank-to-compacted shrink: Enter the project value in %.
Swell factor: Enter the project value in %.
Truck capacity: Enter the project value in cu yd.
Loose soil density: Enter the project value in lb/cu ft.
Excavation / disposal per cubic yard: Enter the project value in $.

COMMON MISTAKES

Checks that prevent bad estimates

Mixing units or entering a measurement in a different unit than the selected field unit.
Using a planning default when the exact manufacturer or supplier specification is available.
Rounding intermediate measurements too early instead of rounding the final purchase quantity.
Ignoring waste, compaction, cuts, laps, settlement, or full-package rounding where the project requires them.

SOURCES & REVIEW

How this estimate is supported

The implemented formula, assumptions, and worked example on this page are the calculator-specific reference. BuildYard's broader rules are documented in the Calculation Methodology and Sources & References.

For material density, coverage, yield, dimensions, package quantity, price, and other product-specific values, the current manufacturer or supplier specification should override a planning default.

Last reviewed: September 15, 2026, as part of the site-wide calculator workflow validation pass. See the BuildYard Changelog.

LEARN THE METHOD

Guides related to this calculator

All guides

Soil & landscaping

Topsoil Volume, Depth, Cubic Yards, and Delivery

Learn how topsoil area, installed depth, cubic yards, bulk density, bags, settlement, and delivery assumptions affect lawn and landscape estimates.

Read guide →Gravel & stone

Gravel Volume, Weight, Density, and Tonnage Explained

Understand gravel volume, bulk density, tons, compacted depth, waste, and supplier conversions before estimating aggregate for a driveway, pad, or path.

Read guide →

COMMON QUESTIONS

Cut and Fill Calculator FAQ

What does the Cut and Fill Calculator calculate?

It converts the measurements for balancing a rectangular grading zone into the buying units normally used for normalized bank cut, compacted fill, and loose soil movement, with the relevant waste, package, weight, or cost outputs shown on the result card.

How accurate is this cut and fill calculator?

The geometry is calculated from the values you enter. Final ordering accuracy still depends on field measurements, supplier density or coverage, product dimensions, compaction, cuts, and the selected allowance.

What should I verify for balancing a rectangular grading zone?

Use separate average cut and fill depths plus project-specific reuse, bank-to-compacted shrink, and swell; detailed balance still requires survey surfaces and material classification. Confirm the selected product, field conditions, and purchasing increments before placing the order.

Should I round the result up?

Yes for indivisible buying units such as bags, sheets, bundles, pallets, boxes, bars, and truck loads. The calculator rounds those purchase quantities up automatically.

KEEP ESTIMATING

Related earthwork calculators

All Earthwork tools

Earthwork